PRIMORIS      Contacts      FAQs      INSTICC Portal
 

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the 15th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
2. ROBOTICS AND AUTOMATION
3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
4. INDUSTRIAL INFORMATICS


AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications on Intelligent Control Systems and Optimization
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Learning Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-based Systems Applications
  • Machine Learning in Control Applications
  • Neural Networks based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Engineering Applications on Robotics and Automation
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Industrial Networks and Automation
  • Intelligent Transportation Technologies and Systems
  • Mechatronics Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Network Robotics
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Surveillance, Fault detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


  • Adaptive Signal Processing and Control
  • Biological Inspired Sensors
  • Computer and Microprocessor-based Control
  • Defect and Change Detection and Identification
  • Engineering Applications
  • Environmental Monitoring and Control
  • Information-based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS


  • Computer-based Manufacturing Technologies
  • Energy Efficiency and Green Manufacturing
  • Human Factors & Human-System Interface
  • Industrial Automation and Robotics
  • Industrial Internet of Things
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Scheduling and Control
  • Production Tasks' Design, Planning and Management
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Systems Modelling and Simulation

KEYNOTE SPEAKERS

Keith ClarkImperial College London, United Kingdom
Christian SchletteUniversity of Southern Denmark, Denmark

PAPER SUBMISSION

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on CD-ROM support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
All papers presented at the conference venue will be available at the SCITEPRESS Digital Library.
A short list of presented papers will be selected so that revised and extended versions of these papers will be published by Springer in a LNEE Series book.
The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), INSPEC, DBLP, EI (Elsevier Engineering Village Index) and Scopus.

SECRETARIAT

ICINCO Secretariat
Address: Av. D. Manuel I, 27A, 2º esq.
             2910-595 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: http://www.icinco.org/

VENUE

Available soon.

CONFERENCE CHAIR

Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France

PROGRAM CHAIR

Oleg GusikhinFord Motor Company, United States

PROGRAM COMMITTEE MEMBERS

Srinivasan A, Caledonian College of Engineering, Galsgow Caledonian University, Oman
Hussein A. Abdullah, University of Guelph, Canada
Roseli A. Francelin Romero, University of São Paulo, Brazil
Chriette Abdelhamid, Ecole Centrale de Nantes, France
Sadek Absi Alfaro, The Brasilia University, Brazil
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Qingsong Ai, Wuhan University of Technology, China
Adel Al-Jumaily, University of Technology Sydney, Australia
Erdinç Altug, Istanbul Technical University, Turkey
Yacine Amirat, University Paris Est Créteil (UPEC), France
Rafael Aroca, Universidade Federal de São Carlos, Brazil
Vijanth Sagayan Asirvadam, Universiti Teknologi PETRONAS, Malaysia
T. Asokan, Indian Institute of Technology Madras, India
Mohamed Amine Atoui, University of Oulu, Finland
Alfonso Baños, Universidad de Murcia, Spain
Guilherme Barreto, Universidade Federal do Ceará, Brazil
Ruth Bars, Budapest University of Technology and Economics, Hungary
Roman Barták, Charles University in Prague, Czech Republic
Marcelo Becker, Escola de Engenharia de São Carlos, Brazil
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Carsten Behn, Ilmenau University of Technology, Germany
Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
Lyes Benyoucef, Aix-Marseille University, France
Karsten Berns, University of Kaiserslautern, Germany
Reinaldo Bianchi, Centro Universitario da FEI, Brazil
Mauro Birattari, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Richard D. Braatz, Massachusetts Institute of Technology, United States
Robert Brennan, University of Calgary, Canada
Glen Bright, University of KwaZulu-Natal, South Africa
Sebastien Briot, Laboratoire des Sciences du Numérique de Nantes, France
Marvin Bugeja, University of Malta, Malta
Kevin Burn, University of Sunderland, United Kingdom
Fernando Caballero, University of Seville, Spain
Kenneth Camilleri, University of Malta, Malta
Giuseppe Carbone, Sheffield Hallam University, United Kingdom
Alessandro Casavola, University of Calabria, Italy
Marco Castellani, University of Birmingham, United Kingdom
Kalinka Castelo Branco, ICMC – USP, Brazil
Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Yuh-Min Chen, National Cheng Kung University, Taiwan
Albert Cheng, University of Houston, United States
Sung-Bae Cho, Yonsei University, Korea, Republic of
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne, France
Daisuke Chugo, Kwansei Gakuin University, Japan
Carlos Coello Coello, CINVESTAV-IPN, Mexico
James M. Conrad, University of North Carolina at Charlotte, United States
Erik Cuevas, Universidad de Guadalajara, Mexico
José Boaventura Cunha, University of Trás-os-montes and Alto Douro, Portugal
Joshua Dayan, Technion – Israel Institute of Technology, Israel
Cesar de Prada Moraga, Universidad de Valladolid, Spain
Angel P. Del Pobil, Universitat Jaume I, Spain
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino, Sapienza University of Rome, Italy
Rüdiger Dillmann, Karlsruhe Institute of Technology - KIT, Germany
Alexandre Dolgui, IMT Atlantique, France
Wenjie Dong, University of Texas Rio Grande Valley, United States
António Dourado, University of Coimbra, Portugal
Vasile Dragan, Romanian Academy, Romania
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
Richard J. Duro, Universidade Da Coruña, Spain
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Ashraf Elnagar, University of Sharjah, United Arab Emirates
Simon G. Fabri, University of Malta, Malta
Luca Ferrarini, Politecnico di Milano, Italy
Paolo Fiorini, University of Verona, Italy
Juan J. Flores, University of Michoacan, Mexico
José Fonseca, University of Aveiro, Portugal
Mauro Franceschelli, Università di Cagliari, Italy
Toyomi Fujita, Tohoku Institute of Technology, Japan
Toshio Fukuda, Nagoya University, Japan
Mauro Gaggero, National Research Council of Italy, Italy
Cipriano Galindo, University of Malaga, Spain
Maria I. Garcia-Planas, Universitat Politecnica de Catalunya, Spain
Len Gelman, Cranfield University, United Kingdom
Giuseppina Gini, Politecnico di Milano, Italy
Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
Amr Goneid, The American University in Cairo, Egypt
John Gray, University of Manchester, United Kingdom
Lucian Teodor Grigorie, University of Craiova, Romania
Lech Grzesiak, Warsaw University of Technology, Poland
Deepak Gupta, Wichita State University, United States
Thomas Gustafsson, Luleå University of Technology, Sweden
Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Maki K. Habib, The American University in Cairo, Egypt
Jörg Hähner, Universität Augsburg, Germany
Wolfgang Halang, Qingdao University of Science and Technology, China
Kensuke Harada, National Inst. of AIST, Japan
Jennifer Harding, Loughborough University, United Kingdom
Iraj Hassanzadeh, University of Alberta-, Canada
Bodo Heimann, Leibniz University Hannover, Germany
Dominik Henrich, University of Bayreuth, Germany
Suranga Hettiarachchi, Indiana University Southeast, United States
Yasuhisa Hirata, Tohoku University, Japan
Wladyslaw Homenda, Warsaw University of Technology, Poland
Jonathan How, Massachusetts Institute of Technology, United States
Mihail Hristov Antchev, Technical University - Sofia, Bulgaria
Yisheng Huang, Nat. Ilan Univ., Taiwan
Ju Hyun Park, Yeungnam University, Korea, Republic of
Daniela Iacoviello, Sapienza University of Rome, Italy
Koji Ikuta, University of Tokyo, Japan
Ivan Ivanov, Sofia University "St. Kl. Ohridski", Bulgaria
Dmitry Ivanov, Berlin School of Economics and Law, Germany
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Thira Jearsiripongkul, Thammasat University, Thailand
Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
Myong K. Jeong, Rutgers University, United States
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Márcio José da Cunha, Federal University of Uberlândia, Brazil
Marc Jungers, CNRS - Université de Lorraine, France
Fabrício Junqueira, University of São Paulo (USP), Brazil
Michail Kalogiannakis, University of Crete, Greece
Mansour Karkoub, Texas A&M Universiy, Qatar
Dimitrios Karras, Sterea Hellas Institute of Technology, Greece
Tohru Kawabe, University of Tsukuba, Japan
Rafael Kelly, CICESE Research Center, Mexico
Jonghwa Kim, University of Science & Technology, Korea, Republic of
DaeEun Kim, Yonsei University, Korea, Republic of
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czech Republic
Masao Kubo, Narional Defense Academy of Japan, Japan
Dong-Soo Kwon, KAIST, Korea, Republic of
Sébastien Lahaye, Istia - LARIS, France
Jimmy Lauber, University of Valenciennes, France
Sangyoon Lee, Connecticut College, United States
Kauko Leiviskä, University of Oulu, Finland
Fabrizio Leonardi, FEI University, Brazil
Gennady Leonov, Saint-Petersburg State University, Russian Federation
Tsai-Yen Li, National Chengchi University, Taiwan
Guoshi Li, University of North Carolina at Chapel Hill, United States
Gordon Lightbody, University College Cork, Ireland
Guoping Liu, University of South Wales, United Kingdom
Roberto LLopis, University Jaume I, Spain
Niels Lohse, Loughborough University, United Kingdom
Luís Seabra Lopes, University of Aveiro, Portugal
Sérgio F. Lopes, University of Minho, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Yu-Shen Lu, National Taiwan Normal University, Taiwan
Martin Lukac, Nazarbayev University, Kazakhstan
Danilo Maccio, National Research Council of Italy, Italy
José Tenreiro Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Anthony Maciejewski, Colorado State University, United States
Ana Madureira, ISEP/IPP, Portugal
Nitaigour Mahalik, California State University - Fresno, United States
Magdi S. Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Stamatis Manesis, University of Patras, Greece
Pushparaj Mani Pathak, Indian Institute of Technology, India
Konrad Markowski, Warsaw University of Technology, Poland
Philippe Martinet, Ecole Centrale de Nantes, France
Tariq Masood, University of Cambridge, United Kingdom
Alicja Mazur, Wroclaw University of Technology, Poland
Ross McAree, University of Queensland, Australia
Seán McLoone, Queen's Unviersity Belfast, Ireland
Joaquim Melendez, University of Girona, Spain
Antonio Mendes Lopes, University of Porto, Portugal
Nadhir Messai, CReSTIC, France
Konstantinos Michail, Cyprus University of Technology, Cyprus
Sara Moein, Mount Sinai School of Medicine, United States
Francesco Carlo Morabito, University Mediterranea of Reggio Calabria, Italy
George Moustris, National Technical University of Athens, Greece
Rafael Muñoz-salinas, University of Cordoba, Spain
Riccardo Muradore, University of Verona, Italy
Saeid Nahavandi, Deakin University, Australia
Cairo Lúcio Nascimento Júnior, Instituto Tecnológico de Aeronáutica, Brazil
Andreas Nearchou, University of Patras, Greece
Juan J. Nieto, University of Santiago de Compostela, Spain
Ivan Nunes da Silva, Universidade de São Paulo, Brazil
Jun Okamoto, Escola Politécnica da USP, Brazil
Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
Sanjeevikumar Padmanaban, University of Johannesburg, South Africa
Igor Paromtchik, INRIA, France
Ignacio Parra-Alonso, University of Alcalá, Spain
Pierre Payeur, University of Ottawa, Canada
Dariusz Pazderski, Poznan University of Technology, Poland
Qingjin Peng, University of Manitoba, Canada
Gustavo PESSIN, USP, Brazil
D. T. Pham, The University of Birmingham, United Kingdom
S. G. Ponnambalam, Monash University Malaysia, Malaysia
Radu-Emil Precup, Politehnica University of Timisoara, Romania
Krishna R. Pattipati, University of Connecticut, United States
Akshay Rajhans, MathWorks, United States
Oscar Reinoso, Miguel Hernandez University, Spain
nidhal rezg, LGIPM, France
Juha Röning, University of Oulu, Finland
João Mauricio Rosário, University of Campinas, Brazil
Hubert Roth, University Siegen, Germany
António Ruano, University of Algarve, Portugal
Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
Carlos Sagüés, Universidad de Zaragoza, Spain
Priti Srinivas Sajja, Sardar Patel University, India
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-Badeeh Mohamed Salem, Ain Shams University, Egypt
Marcello Sanguineti, University of Genoa, Italy
Rafael Santos Mendes, University of Campinas, Brazil
Nilanjan Sarkar, Vanderbilt University, United States
Jurek Sasiadek, Carleton University, Canada
Hideyuki Sawada, Waseda University, Japan
Klaus Schilling, University Würzburg, Germany
Daniel Schmidt, SEW Eurodrive GmbH, Germany
Gerhard Schweitzer, ETH Zurich, Switzerland
Gerald Seet, Nanyang Technological University, Singapore
Roman Sergienko, riskmethods GmbH, Germany
Madhavan Shanmugavel, Monash University, Malaysia
Jinhua She, Tokyo University of Technology, Japan
Houria Siguerdidjane, CentraleSupelec, France
Vasile Sima, National Institute for Research & Development in Informatics, Romania
Daniel Simon, INRIA, France
Adam Slowik, Koszalin University of Technology, Poland
Andrzej Sluzek, Khalifa University, United Arab Emirates
Jorge Solis, Karlstad University / Waseda University, Sweden
Stefan Sosnowski, Technische Universitaet Muenchen (TUM), Germany
Stefano Squartini, Università Politecnica delle Marche, Italy
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
J. D. Stigter, Wageningen University, Netherlands
Olaf Stursberg, University of Kassel, Germany
Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
Jian Sun, Beijing Institute of Technology, China
Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
Rubens Tabile, Universidade de São Paulo, Brazil
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Abdelhamid Tayebi, Lakehead University, Canada
Daniel Thalmann, Nanyang Technological University, Singapore
Simon Thompson, AIST, Japan
Germano Torres, PS Solutions, Brazil
Mohamed Trabia, University of Nevada, Las Vegas, United States
Wa-Muzemba Tshibangu, Morgan State University, United States
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University, United Kingdom
Ali Emre Turgut, Middle East Technical University, Turkey
Bartlomiej Ufnalski, Warsaw University of Technology, Poland
José Valente de Oliveira, Universidade do Algarve, Portugal
Angel Valera, Universidad Politécnica de Valencia, Spain
Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
Dr. Varga, University of Miskolc, Hungary
Cesar Vargas-Rosales, Tecnologico de Monterrey, Campus Monterrey, Mexico
Ramiro Velazquez, Universidad Panamericana, Mexico
Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
Arnoud Visser, Universiteit van Amsterdam, Netherlands
Ljubo Vlacic, Griffith University, Australia
Nikolay Vladimirovich Kuznetsov, Saint-Petersburg State University, Russian Federation
Damir Vrancic, Jožef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universität Hannover, Germany
Mattias Wahde, Chalmers University of Technology, Sweden
Feng Wan, University of Macau, Macau
Jingyu Wang, Northwestern Polytechnical University (NPU), China
Zhenzhen Wang, Chinese Academy of Sciences, China
Long Wang, Peking University, China
James Whidborne, Cranfield University, United Kingdom
Warren White, Kansas State University, United States
Heinz Worn, KIT - Karlsruhe Institute for Technology, Germany
Min Wu, China University of Geosciences, China
Wenjun Xu, Wuhan University of Technology, China
Qinmin Yang, Zhejiang University, China
Hujun Yin, University of Manchester, United Kingdom
Weiwei Yu, Northwestern Polytechnical University, China
Massimiliano Zecca, Loughborough University, United Kingdom
Yuming Zhang, Univ. of Kentucky, United States
Jie Zhang, Univ. of Newcastle, United Kingdom
Primo Zingaretti, Università Politecnica delle Marche, Italy
Argyrios Zolotas, University of Lincoln, United Kingdom

(list not yet complete)

footer